Argo revives with more than a respectful eye
19 April 2019
Amcor and GSK win Alufoil Trophy with packaging machine CAM (Partena)
31 May 2019
Show all

Filling and capping line

This line is designed to fill and cap bottle formats from 50 ml up to 125 ml and includes an L100 vacuum-based controlled-level type filling machine and a T105 rotary capping machine.
The L100 machine system is based on a vacuum pneumatic pump, which creates depression inside the bottles by means of the 36 filling nozzles. Thus, the liquid flows naturally from the machine tank towards the depression area inside the bottle. Once the necessary filling level is reached, which is given by the nozzle position, the product in excess is sucked and pushed to a recovery tank and then again put in circle in the system. All parts in contact with the liquid are in stainless steel AISI316L and other FDA approved materials.



– pre-set adjustment-free filling recipes available upon format change-over, a filling system based on physical depression;

– this vacuum based filling system ensures that the filling is constant in time even inside glass bottles (which have different dimensional tolerances). This is an effective choice in the cosmetic market where the aesthetical aspect of the final packaging is one the most important aspects to be considered.


The capping group of the T105 consists of 8 rotating spindles. Each spindle, synchronised with the orientation and feeding caps’ group, picks and places/screws the cap onto the bottle. A magnetic clutch interrupts the rotation of the spindle when the pre-set closing torque is reached.


Advantages of T105:

– Independent spindle closing torque settings;

– Capping head height setting via servo motor controlled via HMI.







Follow us on Facebook (, Instagram( and Linkedin (CAMpackaging).